# A workbench from construction lumber

> Two weekends, twelve 2×4s and one mistake with the vise I'd make again.

- URL: https://personal-example.notra.site/blog/workbench-from-construction-lumber
- Published: 2026-09-21
- Tags: woodworking

My garage bench was a door on two sawhorses. It moved every time I planed anything. This is the replacement, built from twelve 2×4s that cost less than a good chisel.

## Cut list

| Part            | Count | Size           |
| --------------- | ----- | -------------- |
| Top laminations | 8     | 1.8 m          |
| Legs            | 4     | 85 cm, doubled |
| Stretchers      | 4     | 1.4 m          |

## What I’d tell my past self

1. Let the wood sit for a week

   Construction lumber arrives wet. Mine moved almost 3 mm across the width after I flattened it the first time.

2. Glue the top in sections

   Four boards at a time. Gluing all eight at once needed more clamps and more hands than I had.

3. Drill the vise holes before assembly

   I didn’t, and boring a 25 mm hole through a finished leg while lying on the floor was not fun.

The bench weighs about 70 kg now. It does not move.
